HT High Opacity Zirconia Block for Veneers / Inlays / Onlays White Shade CAD/CAM Milling Disc 98x25mm

Material Science Breakthrough

• Triple-Phase Stabilization: Yttria-enhanced crystal structure prevents low-temperature degradation while maintaining optical properties.

• Stress-Optimized Matrix: Nano-scale grain distribution (0.4μm) minimizes crack propagation under cyclic loading.

• Bio-Integration Surface: Proprietary surface treatment enhances soft-tissue attachment for implant cases.

Clinical Versatility

• Minimal-Preparation Cases
  → Veneers (≥0.3mm thickness)
  → Inlays/Onlays with 0.5mm margins

• High-Stress Environments
  → Molar crowns with 0.8mm occlusal reduction
  → 4-unit bridges (14-25mm thickness recommended)

• Implant Solutions
  → Titanium-hybrid abutments with 0.3mm masking capability
  → Screw-retained frameworks for All-on-4

Performance Validation

Technical Specifications

Workflow Advantages

1. Milling Stage

• 18% faster machining vs. 1300MPa zirconia

• No edge chipping at 0.3mm wall thickness
  2. Staining & Glazing

• Uniform absorption without pooling

• Natural gradient effect in monolithic layers
  3. Polishing

• Achieves Ra<0.1μm with 3-step protocol

• Maintains gloss after simulated 5-year brushing

Why 2,300+ Labs Standardize on HT:

"Replaced three zirconia lines with one material – our remake rate dropped 27% in 6 months."
– Technicad Dental Laboratory, Germany

Certifications: ISO 13356, FDA 510(k), CE 0373
Shelf Life: 24 months in sealed packaging
Note: Sinter at 1530°C with 120min hold time for optimal results

Sintering charts: